Runyes SEA-45L-D Bench Autoclave

$7,500.00 + GST

A styish fresh look for your pactice, the SEA-45-D will fulfill the neds of a “larger loads” department.

An Economic solution from Medspares.

Placement and validation are additional costs – depending on location.

Please allow 5 – 6 weeks for delivery.

SKU RUNY-SEA-45L-D Categories , , ,

Share
Description

Runyes SEA-45L-D Bench Autoclave

Auto Open/Close Door

European Class B with 3-time pre-vacuum preceding
vacuum drying Intended for the sterilisation of unwrapped, wrapped, hollow and solid instruments

Bridging the gap between affordability, reliability and aesthetics, this award winning design will surely catch your eye. With a full touchscreen interface, you will have controls at the tip of your fingers. Autoclave with confidence, dignity and poise.

Australia TGA approved. Designed in accordance with Australian Standard AS/NZ 4815 and European Classifications.
European Class B with 3-time pre-vacuum preceding vacuum drying Intended for the sterilisation of unwrapped, wrapped, hollow and solid instruments.
TOUCH SCREEN
1. Touchable screen makes it easy for operation.
2.User-friendly operation interface with elegant design.
SUITABLE FOR DIFFERENT TYPES INSTRUMENTS
Surgical instruments, dental intruments, glass wares, injectionunits and other objects of compression resistance and hot steam resistance.
BIG CAPACITY OPEN TANK
1.Open tank, easy-to-clean.
2.Bult-in water quality sensor monitors water quality, reduces machine failure rate, and prolongs machine life time.
TWO TYPES OF RECORD (DUAL RECORDING)
1. USB Master controller stores 2,000 fresh cycles; the data can be downloaded via USB. You can check and print all the records with a computer.
2. Micro-Printer(Optional) Prints cycle data when the cycle ends.
DOUBLE LOCK SYSTEM -MECHANICAL LOCK WITH AIR LOCK SYSTEM
Double lock system makes the autoclave safer, and prevents potential safety hazards
SIX LAYERS’ NEW STRUCTURE CHAMBER, CREATING NEW CHAMBER STRUCTURE
1. The chamber adopts six layers’ structure, using the special shaping finish drawing technology, dusting and polishing. It has superstrong pressure-bearing properties, and pass 60000 times fatigue life testing, the outer layer adopts the superfine micropore foaming technique.
2. As the tray rack can rolates to 90 degrees, 5 trays can be used for placing instruments.
TWO CONDENSERS
Faster cooling; prolongs life time.
SAFETY VALVE
Releases pressure overload, and restores idle chamber pressure when the chamber is over-pressured.
AIR FILTER 
Filter airborne impurilties into the chamber to prevent contamination

Overall size (L*W*H) mm 535*850*505
2 Chamber size(mm) φ319X620
3 Chamber capacity 45L
4 Product classification B
5 Input power (VA) 3300 15A
6 Design pressure (MPa) -0.1/0.3MPa
7 Design temperature (℃ ) 140℃
8 Temperature display accuracy (℃ ) 0.1℃
9 Pressure display accuracy (KPa) 1Kpa
10 Fuse parameter F20AL250V
11 Water tank capacity(L) 4.5L 4.5L
12 One cycle water consumption (mL) 650
13 Environment temperature (℃ ) +5℃～ 40℃
14 Relative humidity range ≤85%
15 Net weight (Kg) 92 Kg

Max load for one cycle:
Max load for instrument 5.5Kg
Max load for fabrics 2.5Kg
Max load for single package 1.8Kg

Transportation and storage 

The condition of transportation and storage 

Environment temperature: -40℃～＋ 55℃
Relative humidity: ≤ 85%
Atmosphere: 50KPa ～ 106 KPa. 

Warning for transportation and storage: 

1>Take off the draining pipe, empty the waste water tank.
2> After chamber cool down, empty all pipes and clean water tank Dry the clean water tank and chamber.
3>Turn on the power switch, after self-‐checking, close the door. 

 

Additional information
Weight40 kg
Related products