Howard Wright M9 Ward Bed

Description

Howard Wright M9 Ward Bed

Practical, innovative and simply makes human care easier.

An outstanding low height of 350mm makes patient entry and exit safer and easier while the exceptional under bed clearance provides full access for patient lifters and bed movers at any bed height.

The M9 Ward Bed has been developed and independently tested to the requirements of the latest and most demanding international safety standards.

Designed using our ‘Simple, Smart and Human’ values, minimal maintenance and user instruction is required. Customising to your unique needs is easy with an extensive range of specialist options and accessories.

FEATURES

• Fully electric, lockable functions with battery backup
• High quality LINAK and TENTE components
• 16° Trendelenburg / 13.5° Reverse Trendelenburg
• Quick access control box for simple servicing
• Effortless central locking braking
• Sliding backrest provides added patient comfort

Howard Wright M9 Ward Bed SPECIFICATIONS:

IP RATING: IPX4
EEC CLASSIFICATION: Class 1, Non-invasive
MAXIMUM SWL: 250kg (incl. patient and accessories)
BED MASS: 130kg (incl. siderails and bed ends)
• Durable powdercoated steel structure
• 4 large soft corner buffers
• LINAK electric system with 4 actuators. Approved to IEC 60601-1: 2005
• Power input: 220-240 VAC, 50-60 Hz, 2.0 A max Power output: 24 VDC
• Head bed end storage at the foot end
• Easy access control box with power cord storage
• Dual drainage bag rails
• Backrest and legraise have safety spline  Potential equalisation terminal
• Central locking braking with 2 brake pedals and 1 steer castor
• 4 accessory sockets
• CPR quick release backrest (dampened) OPTIONS
• Choice of ergonomic horizontal or vertical lift-assisted siderails
• Attendant control handset with lockout and underbed light
• Bed mover push bar (compatible with most bed movers)
• Residual current device (RCD)
• Linen rack

SAFETY COMPLIANCE:

• Developed in accordance with the requirements of EN IEC60601-2-52:2010

DIMENSIONS:

• Overall (incl. corner buffers): L: 2240mm, W: 990mm
• Mattress platform: L: 2000mm, W: 840mm
• Siderail: L: 1585mm, H: 435mm (above mattress platform)
• Space between siderail bars: 92 mm (25mm when lowered)
• Space between head end and siderail: 44mm
• Corner buffer diameter: 90mm
• Wheel base: 1200mm, wheel track: 630mm
• Castor diameter: 150mm dual wheel Linea castors
• Maximum deck height: 800mm, minimum deck height: 350mm
• Linear translation as bed raises and lowers: 0mm
• Trendelenburg 16°, reverse Trendelenburg 13.5°
• Maximum backrest angle: 70°
• Maximum upper legraise angle: 40° Maximum lower legraise angle: 10° (All angular dimensions are with reference to horizontal)

UNDER BED CLEARANCES (FOR PATIENT LIFTERS & BED MOVERS)

• Bogie to floor: 185mm • Elevator to floor at lowest height: 140mm