Nidek Lite Oxygen Concentrator

$1,600.00 + GST

A hospital grade oxygen concentrator, not a cheap import from Asia. Our unit is used in medical facilities, dental practices and homes.

Free finger SPo2 meter, click “add to” on options

3 in stock (can be backordered)


SKU NIDE-L5A Categories , ,

Nidek logo

Share
Description

Nidek Lite Oxygen Concentrator

5L Max outlet Rating
Size: 360 x 220 x 580 mm
Weight : 13.6 Kgs
Continuous flow settings: 0.125 – 5 LPM, from Paediatric to Adult
Oxygen concentration: 90% (+6.5% / -3%) at 5 LPM
Oxygen output pressure: 7 PSI
Sound level: Less Than 40 dBA
Power specification: 230 V, 50 Hz
Power consumption: 290 W
Filters: cabinet, Compressor Intake and Bacteria
Quiet – Ultra quiet operation, sound level <40 dBA
Accurate – Lockable flow control valve, range from 0.125 – 5 LPM
Economical – Very low power consumption, only 290 W
Superior design – Direct access to air inlet filer, electronic hour meter and alarm battery
Reaches full purity in less than 3 minutes
High efficiency Thomas compressor
Easy usage and maintenance
Operating system – Timed cycle / Rapid Pressure Swing
Self monitoring alarm system (in OMS model)

 

Description of Operation

Air enters the Nidek Nuvo Family Oxygen Concentrator through an external cooling air intake filter. This filtered air enters the compressor via a suction resonator and fine filter, which quiets the suction sounds made by the compressor. Pressurized air then exits the compressor and passes through a heat exchanger, which reduces the temperature of the compressed air. Next, an electronic valve system directs the air into one of two sieve beds that contain a molecular sieve. The special characteristic property of a molecular sieve is that it physically attracts (adsorbs) nitrogen when air passes through this material, thus enabling the production of high-purity oxygen.

There are two sieve beds or adsorbent columns; while one produces high-purity oxygen, the other is purged of the nitrogen it adsorbed (collected) while it was producing oxygen. Each column produces oxygen for approximately 5.5 seconds and delivers it to the product storage volume in the end of the column. Oxygen exits the adsorbent column through a pressure regulator, flow control valve, flow meter, and final product filter. The flow control valve, which is part of the flow meter, controls the flow rate of oxygen delivered to the patient. The Nuvo Family unit delivers up to 95% oxygen concentration at rated flow. The remaining constituents of the product gas stream are nitrogen and argon, both of which are part of the air we breathe, are inert, and are completely safe. It’s a superb little oxygen machine

Additional information
Weight20 kg